Tuesday, August 9, 2011

NASA's DC-8 Flying Lab Validates Laser Instruments


Twenty scientists went aloft aboard NASA’s DC-8 flying laboratory in late July to conduct an airborne test of four very different laser techniques for remotely measuring atmospheric carbon dioxide and two laser instruments that remotely measured oxygen. The DC-8 also carried two “truth” instruments – devices that are known to produce accurate data – that took air samples to be compared with the laser measurements.

As part of a research campaign dubbed Active Sensing of CO2 Emissions over Night, Days and Seasons II, or ASCENDS II, the aircraft flew over central California July 28.

The focus of this mission, which is funded by the Earth Science division of NASA's Science Mission Directorate, is the further development of laser-based Earth-observing satellite instruments designed to measure atmospheric carbon dioxide.

"Satellite instruments start in a laboratory and mature to a point where they need to be used in the atmosphere," said DC-8 project manager Frank Cutler at NASA’s Dryden Aircraft Operations Facility in Palmdale, Calif. "The cheapest way to test is first on the ground and then to get the instruments into the air for in-flight analysis.

"The DC-8 flying laboratory is often used to facilitate these assessments," Cutler added. "It is interesting to observe what an instrument that will fly on a satellite goes through to be certified for operational use."

During an instrument-validation flight over central California, the DC-8 first flew descending and ascending spiral patterns above the Castle Airport area near Merced to take sample gas measurements with the truth instruments. The laser instruments were then flown over the airport at various altitudes up to 40,000 feet so that their data could be compared with that of the truth instruments.

The aircraft flies the instruments over different land surfaces, from snow and ice to oceans, forests and deserts, to test the surface reflectance effects on each instrument's performance. These are the same types of surfaces that a laser instrument would find when studying components of the Earth’s atmosphere from space.

Additional flights will take the aircraft over the California and Nevada deserts and offshore over the Pacific Ocean. During an early August flight to British Columbia, Canada, the instruments collected data over snowfields in mountainous regions. The aircraft will also deploy briefly to Minneapolis and St. Paul, Minn., to fly over atmospheric radiation measurement sites for comparison of airborne to ground-based measurements.

"Conducting unique flight experiments on the DC-8 is very exciting and is as close as many of us will get to being a modern day explorer," said ASCENDS II mission scientists Edward Browell of NASA’s Langley Research Center in Hampton, Va., who has conducted more than 25 DC-8 science missions around the world since 1987.

The instrument teams are from NASA’s Langley Research Center in Hampton, Va., NASA’s Goddard Space Flight Center in Greenbelt, Md., ITT Geospatial Systems in Fort Wayne, Ind., and NASA’s Jet Propulsion Laboratory in Pasadena, Calif. A similar ASCENDS instrument validation mission was previously flown in July 2010.


0 comments to "NASA's DC-8 Flying Lab Validates Laser Instruments"

Popular Posts